 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Low-Drop Voltage Regulator TLE 4276 Features Type TLE 4276 V50 TLE 4276 V85 TLE 4276 V10 TLE 4276 V TLE 4276 S V50 TLE 4276 S V85 TLE 4276 S V10 TLE 4276 SV Ordering Code Package Q67000-A9262 Q67000-A9263 Q67000-A9264 Q67000-A9265 Q67000-A9267 Q67000-A9269 Q67000-A9271 Q67000-A9273 P-TO220-5-3 P-TO220-5-3 P-TO220-5-3 P-TO220-5-3 P-TO220-5-43 P-TO220-5-43 P-TO220-5-43 P-TO220-5-43 P-TO220-5-122 P-TO220-5-122 P-TO220-5-122 P-TO220-5-122 P-TO252-5-1 P-TO252-5-1 P-TO 220-5-122 (TO-220 AB/5, Option E3122) TLE 4276 G V50 Q67006-A9266 TLE 4276 G V85 Q67006-A9268 TLE 4276 G V10 Q67006-A9270 TLE 4276 GV TLE 4276 D V50 TLE 4276 DV Q67006-A9272 Q67006-A9369 Q67006-A9361 SMD = Surface Mounted Device New type P-TO252-5-1 Data Sheet Version 2.2 (R) * * * * * * * * * 5 V, 8.5 V, 10 V or variable output voltage 4% Output voltage tolerance 400 mA current capability Low-drop voltage Inhibit input Very low current consumption Short-circuit-proof Reverse polarity proof Suitable for use in automotive electronics P-TO220-5-3 P-TO-220-5-43 1 2000-10-11 TLE 4276 Functional Description The TLE 4276 is a low-drop voltage regulator in a TO package. The IC regulates an input voltage up to 40 V to VQ,nom = 5.0 V (V50), 8.5 V (V85), 10 V (V10) and adjustable voltage (V). The maximum output current is 400 mA. The IC can be switched off via the inhibit input, which causes the current consumption to drop below 10 A. The IC is short-circuitproof and includes temperature protection which turns off the device at overtemperature. Dimensioning Information on External Components The input capacitor CI is necessary for compensation of line influences. Using a resistor of approx. 1 in series with CI, the oscillating of input inductivity and input capacitance can be damped. The output capacitor CQ is necessary for the stability of the regulation within the circuit. Stability is guaranteed at values CQ 22 F and an ESR of 3 operating temperature range. Circuit Description The control amplifier compares a reference voltage to a voltage that is proportional to the output voltage and drives the base of the series transistor via a buffer. Saturation control as a function of the load current prevents any oversaturation of the power element. The IC also incorporates a number of internal circuits for protection against: * Overload * Overtemperature * Reverse polarity Data Sheet Version 2.2 2 (R) 2000-10-11 TLE 4276 P-TO220-5-3 P-TO220-5-43 P-TO220-5-122 P-TO252-5-1 GND 1 5 Q INH N.C. (VA) AEP02560 1 5 1 5 1 5 GND INH N.C. (VA) Q AEP02043 GND INH N.C. (VA) Q GND INH N.C. (VA) Q AEP02041 AEP02042 Figure 1 Pin Configuration (top view) Pin Definitions and Functions Pin No. 1 2 3 4 Symbol Function I INH GND N.C. VA Q Input; block to ground directly at the IC with a ceramic capacitor. Inhibit; low-active input Ground Not connected for V50, V85, V10 Voltage Adjust Input; only for adjustable version connect an external voltage divider to determine the output voltage. Data Sheet Version 2.2 3 2000-10-11 = 5 Output; block to ground with a capacitor of C at 10 kHz. 22 F, ESR 3 TLE 4276 Temperature Sensor Saturation Control and Protection Circuit 6 Control Amplifier Q 1 Buffer Bandgap Reference *) **) 2 INH *) For fixed Voltage Regulator only **) For adjustable Voltage Regulator only 4 VA 3 GND AEB02044 Figure 2 Block Diagram Data Sheet Version 2.2 4 2000-10-11 TLE 4276 Absolute Maximum Ratings Parameter Symbol Limit Values min. Voltage Regulator Input I Voltage Current Inhibit INH Voltage Voltage Adjust Input VA Voltage Output Q Voltage Current Ground GND Current Temperature max. Unit Test Condition VI II - 42 - 45 - V - - Internally limited VINH - 42 45 V - VVA - 0.3 10 V - VQ IQ - 1.0 - 40 - V - - Internally limited IGND - 100 mA - Storage temperature - 50 150 Note: Maximum ratings are absolute ratings; exceeding any one of these values may cause irreversible damage to the integrated circuit. Data Sheet Version 2.2 5 Junction temperature Tj Tstg - 40 150 C C - - 2000-10-11 TLE 4276 Operating Range Parameter Input voltage Input voltage Input voltage Junction temperature Thermal Resistance Junction ambient Junction ambient Junction case 1) Symbol Limit Values min. max. Unit Remarks VI VI VI Tj VQ + 0.5 40 VQ + 0.5 40 4.5 V - 40 40 150 V V V C Fixed voltage devices V50, V85, V10 Variable device V Variable device V, VQ < 4 V - Rthj-a Rthj-a Rthj-c - - - 65 80 4 Data Sheet Version 2.2 Package mounted on PCB 80 80 1.5mm3; 35 Cu; 5 Sn; Footprint only; zero airflow. 6 K/W TO220 K/W TO252, TO2631) K/W - 2000-10-11 TLE 4276 Characteristics VI = 13.5 V; - 40 C < Tj < 150 C (unless otherwise specified) Parameter Output voltage Symbol Limit Values min. typ. 4.8 5.0 VQ Output voltage VQ 4.8 Output voltage VQ 8.16 8.50 Output voltage VQ 8.16 8.50 Output voltage VQ 9.6 Output voltage VQ 9.6 Output current limitation1) Current consumption; Iq = I I - IQ Current consumption; Iq = I I - IQ Current consumption; Iq = I I - IQ IQ Iq 400 - 600 - 1100 mA - Iq - 5 10 mA Data Sheet Version 2.2 7 Iq - 100 220 A IQ = 1 mA IQ = 250 mA (R) 10 A VINH = 0 V; Tj 100 C (R) (R) (R) (R) Output voltage tolerance VQ -4 Unit Measuring Condition max. 5.2 Measuring Circuit V V50-Version 1 5 mA < IQ < 400 mA 6 V < VI < 28 V 1 V50-Version 5 mA < IQ < 200 mA 6 V < VI < 40 V 1 V85-Version 5 mA < IQ < 400 mA 9.5 V < VI < 28 V 1 V85-Version 5 mA < IQ < 200 mA 9.5 V < VI < 40 V 1 V10-Version 5 mA < IQ < 400 mA 11 V < VI < 28 V 1 V10-Version 5 mA < IQ < 200 mA 11 V < VI < 40 V 1 V-Version R2 < 50 k VQ + 1 V VI 40 V VI > 4.5 V 5 mA IQ 400 mA 1 1 5.0 5.2 V 8.84 V 8.84 V 10.0 10.4 V 10.0 10.4 V - 4 % 1 1 2000-10-11 TLE 4276 Characteristics (cont'd) VI = 13.5 V; - 40 C < Tj < 150 C (unless otherwise specified) Parameter Current consumption; Iq = I I - IQ Drop voltage1) Symbol Limit Values min. typ. - 15 25 Iq VDR - Drop voltage1) VDR - Power supply ripple rejection Temperature output voltage drift Inhibit PSRR dVQ/ dT - - 54 0.5 - - dB - - 1) Measured when the output voltage VQ has dropped 100 mV from the nominal value obtained at VI = 13.5 V. Data Sheet Version 2.2 8 Input current IINH 5 10 20 A VINH = 5 V (R) Inhibit off voltage VINH 0.5 1.7 - V VQ Inhibit on voltage VINH - 2 3.5 V Line regulation Load regulation VQ,Lo VQ,Li - - Unit Measuring Condition max. mA Measuring Circuit 1 IQ = 400 mA 250 500 mV V50, V85, V10 IQ = 250 mA VDR = VI - VQ variable devices IQ = 250 mA VI > 4.5 V VDR = VI - VQ 1 250 500 mV 1 5 15 35 25 mV mV IQ = 5 mA to 400 mA 1 1 1 mV/K Vl = 12 V to 32V IQ = 5 mA fr = 100 Hz; Vr = 0.5 VSS VQ 4.9 V 0.1 V 1 1 1 2000-10-11 TLE 4276 Input II 100 F 100 nF I1 5Q IQ CQ 22 F Output TLE 4276 R 1*) VQ R 2*) RL IINH VI VINH INH 2 3 GND 4 *) VA Voltage Adjust *) Optional for adjustable Voltage Regulator AES02045 Figure 3 Measuring Circuit Input I1 5Q Output CI e.g. KL 15 INH 2 TLE 4276 4 GND *) CQ R 1*) 3 VA Voltage Adjust R 2*) *) Optional for adjustable Voltage Regulator AES02046 Figure 4 Application Circuit Data Sheet Version 2.2 9 2000-10-11 TLE 4276 Application Information for Variable Output Regulator TLE 4276 V, SV, DV, GV The output voltage of the TLE 4276 V can be adjusted between 2.5 V and 20 V by an external output voltage divider, closing the control loop to the voltage adjust pin VA. The voltage at pin VA is compared to the internal reference of typical 2.5 V in an error amplifier. It controls the output voltage. 5Q Internal Reference 2.5 V Typical Vref Current and Saturation Control 4 VA R1 CQ 22 F R2 AEB02804 Figure 5 Application Detail External Components at Output for Variable Voltage Regulator The output voltage is calculated according to Equation 1: Vref is typically 2.5 V. To avoid errors caused by leakage current IVA, we recommend to choose the resistor value R2 according to Equation 2: R2 < 50 k For a 2.5 V output voltage the output pin Q is directly connected to the adjust pin VA. The accuracy of the resistors R1 and R2 add an additional error to the output voltage tolerance. The operation range of the variable TLE 4276 V is VQ + 0.5 V to 40 V. For internal biasing a minimum input voltage of 4.3 V is required. For output voltages below 4 V the voltage drop is 4.3 V - VQ Data Sheet Version 2.2 VQ = (R1 + R2)/R2 Vref, neglecting IVA (1) (2) 10 2000-10-11 TLE 4276 Typical Performance Characteristics (V50, V85 and V10): Voltage VDR versus Output Current IQ 600 mV AED03017 Max. Output Current IQ versus Input Voltage VI 800 mA AED03020 VDR IQ 500 400 T j = 125 C 600 T j = 25 C VQ = 0 V 400 300 200 T j = 25 C 100 200 0 0 100 200 300 mA 400 0 0 10 20 30 40 V 50 IQ VI Current Consumption Iq versus Output Current IQ (high load) 60 AED03021 Current Consumption Iq versus Output Current IQ (low load) 0.6 AED03022 Iq mA 50 Iq mA 0.5 40 0.4 T j = 25 C VI = 13.5 V 30 0.3 T j = 25 C VI = 13.5 V 20 0.2 10 0.1 0 0 100 200 300 400 mA 600 0 0 10 20 30 40 mA 60 IQ IQ Data Sheet Version 2.2 11 2000-10-11 TLE 4276 Typical Performance Characteristics for V50: Output Voltage VQ versus Temperature Tj 5.2 AED03081 Current Consumption Iq versus Input Voltage VI 30 mA AED01967 VQ V q 5.1 20 VI = 13.5 V 5.0 T j = 25 C R L = 20 10 4.9 4.8 -40 0 40 80 120 C 160 0 0 10 20 30 Tj V V 50 Low Voltage Behavior 6 AED01968 High Voltage Behavior 3.5 mA II 3.0 2.5 AED03082 VQ V 5 VQ 4 2.0 VI = VQ 3 1.5 T j = 25 C R L = 20 2 T j = 25 C R L = 6.8 k 1.0 0.5 1 0 -2 -50 0 0 2 4 6 8 V 10 -25 0 25 V 50 VI Data Sheet Version 2.2 12 VI 2000-10-11 TLE 4276 Typical Performance Characteristics for V85: Output Voltage VQ versus Temperature Tj 9.0 AED03018 Current Consumption Iq versus Input Voltage VI 30 AED03025 VQ V Iq mA 25 VI = 13.5 V 8.5 20 T j = 25 C R L = 34 15 8.0 10 5 7.5 -40 0 40 80 120 C 160 0 0 10 20 30 40 V 50 Tj VI Low Voltage Behavior 12 VQ V 10 VQ 8 V =VQ 6 T j = 25 C R L = 34 4 AED01972 High Voltage Behavior 3.5 mA II 3.0 2.5 2.0 1.5 1.0 0.5 AED03080 T j = 25 C R L = 10 k 2 0 -2 -50 0 0 4 8 12 16 V 20 V -25 0 25 V 50 VI 13 2000-10-11 Data Sheet Version 2.2 TLE 4276 Typical Performance Characteristics for V10: Output Voltage VQ versus Temperature Tj 10.5 AED03019 Current Consumption Iq versus Input Voltage VI 30 AED03023 VQ V Iq mA 25 VI = 13.5 V 10.0 20 T j = 25 C R L = 40 15 9.5 10 5 9.0 -40 0 40 80 120 C 160 0 0 10 20 30 40 V 50 Tj VI Low Voltage Behavior 12 AED03024 High Voltage Behavior 3.5 mA II 3.0 2.5 AED03079 VQ V 10 VQ 8 2.0 VI = VQ 6 1.5 T j = 25 C R L = 40 4 T j = 25 C R L = 12 k 1.0 0.5 2 0 -2 -50 0 0 4 8 12 16 V 20 -25 0 25 V 50 VI Data Sheet Version 2.2 14 VI 2000-10-11 TLE 4276 Package Outlines P-TO220-5-3 (Plastic Transistor Single Outline) Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book "Package Information" Data Sheet Version 2.2 15 Dimensions in mm 2000-10-11 TLE 4276 P-TO220-5-43 (Plastic Transistor Single Outline) Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book "Package Information" Data Sheet Version 2.2 16 Dimensions in mm 2000-10-11 TLE 4276 P-TO220-5-122 (Plastic Transistor Single Outline) 9.9 8 7.5 6.6 10.5 0.15 B A 1.3 +0.1 -0.02 0.1 2.4 4.4 9.2 0.2 (1.3) 3.6 0.3 0 ... 0.15 0.8 +0.1 -0.03 1.7 4 x 1.7 = 6.8 0.5 +0.15 0.25 M A B 5 +3 0.1 B Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book "Package Information". SMD = Surface Mounted Device Data Sheet Version 2.2 17 Dimensions in mm 2000-10-11 GPT05259 1) Shear and punch direction no burrs this surface Back side, heatsink contour All metal surfaces tin plated, except area of cut 1.5 0.4 (14.1) 0.05 1) 6.5 TLE 4276 P-TO252-5-1 (Plastic Transistor Single Outline) 6.5 +0.15 -0.10 2.3 +0.05 -0.10 B A 1 0.1 0...0.15 0.9 +0.08 -0.04 1 0.1 5.4 0.1 9.9 0.5 6.22 -0.2 0.8 0.15 (4.17) 0.15 max per side 0.51 min 5x0.6 0.1 1.14 0.5 +0.08 -0.04 0.1 4.56 0.25 M AB GPT09161 All metal surfaces tin plated, except area of cut. Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book "Package Information". SMD = Surface Mounted Device Data Sheet Version 2.2 18 Dimensions in mm 2000-10-11 TLE 4276 Edition 2000-10-11 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 2000. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of noninfringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet Version 2.2 19 2000-10-11 |
Price & Availability of TLE4276DV
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |